Our top of the line seal coat. ArmorTop is the standard product produced for the Southern California market. Designed with high non-volitale content and low wet track abrasion for a long lasting, durable surface.

ArmorTop meets or exceeds all Green Book 203-9 specifications.

Recommended as a resurfacing and protection to asphalt pavement surfaces and helps prevent further deterioration of base. Ideal for walkways, playgrounds, traffic areas, and parking lots.

Recommended as a surface sealer over asphalt pavement to fill small voids and seal in spalling particles. Helps to provide a smoother, slip resistant surface and allows better water runoff. Ideal for walkways, playgrounds, parking lots, and traffic areas.

Recommended as a seal coat over new, cured or existing asphalt pavements in either smooth or non-slip grades. Jet Top provides excellent protection against ultraviolet photooxidation as well as petroleum spills and drainage. Ideal for airfields, truck depots, loading facilities, parking lots, service stations, fast foods restaurants, and garages.

Jet Top with special modifiers and resins specifically designed to be used at military, civilian, as well as private airports where heavy truck and aircraft traffic is expected. Its chemical compositor has been carefully selected to enhance protection against aggressive chemical agents which are present in gasoline, kerosene, hydraulic fluids, and brake fluids.

Poly Oil Sil is an acrylic emulsion primer to promote adhesion over gasoline, grease and oil spots or chemical stains prior to the application of coal tar and asphaltic based sealcoats. It is easy to use on parking lots, driveways, airport runways or any asphalt surface.

Sealcoat additive Pave Tough is a specially formulated co-polymer emulsion designed to modify asphalt pavement sealers and coal tar emulsions. It can be used with Western Colloid’s complete line of sealcoats, as well as, other manufacturers’ SS1H based sealcoats. Pave Tough is blended with chemically resistant additives, which clearly distinguishes it from other products on the market. It results in outstanding toughness, fast curing time, greater flexibility, high viscosity and excellent suspension of aggregates. It also increases the resistance to oils, fuels, grease and water. It is recommended on any asphalt surface where there are heavy traffic patterns or fuel resistance is needed. It is ideal for use as an additive when sealcoating commercial an industrial parking lots, service stations, convenience stores and airports. Pave Tough allows suspension of up to 20 pounds of sand per gallon.

TUFF TEX: Specially formulated co-polymer emulsion designed to modify asphalt emulsion pavement sealers such as Western Colloid’s ArmorTop #375, ParkTop #302, #327, Jet Top #400 and Hercules #130. Can be used to modify SS1-H based pavement sealers manufactured by other vendors. The result of Tuff Tex is outstanding toughness to the finished product, faster curing time, greater flexibility, high viscosity and excellent suspension of aggregate. Tuff Tex enhances sealcoat color and prevents gray-out caused by sun oxidizing asphalt binders. TUFF TEX is epoxy modified to enhance performance and blended with chemically resistant additives, distinguishing it from other products on the market.

TUFF TEX when added to Western Colloid sealcoat products will greatly increase resistance to oils, fuels, grease and water. Recommended on any asphalt surface where there are heavy traffic patterns or where fuel resistance is needed. Additionally, TUFF TEX allows suspension of up to 8 lbs. of sand per gallon of sealcoat.

Flex Crac is a rubberized asphalt emulsion designed for filling narrow cracks up to 1/2 “ in width, in asphaltic, as well as concrete surfaces. It has resilient characteristics that can allow a threading quality or memory. It is ideal for immediate crack filling needs and requires no heating or special equipment. It is ready to use on parking lots, airports, athletic courts, driveways, and walkways.

Flex Crete is a light gray highly modified emulsion with a selected plasticizer to achieve greater flexibility. It is designed for filling narrow concrete cracks up to 1/2’” in width and depth. It is ready to use on all concrete surfaces such as parking lots, airports, athletic courts, driveways, and walkways.

Asphalt Leveling Compound is a blend of asphalt emulsion, mineral fibers, glass fiber, ground rubber, and plasticizer, designed to remain pliable especially for patching alligatored areas. It can also be used as a crack filler for cracks in excess of ½” in width. As with #651 Flex Crac, Asphalt Leveling Compound is easy to use and requires no heavy equipment or hot melters. Just pour and squee- gee to receive incredible results. It is used on asphalt surfaces such as alligatored areas, athletic courts, driv